The course will give a brief overview of Ultimate load design principles and plastic capacity of sections Capacity estimate of tubular joints under axial, flexural and torsional buckling will be discussed. Fundamentals of impact analysis and its application to collision problems on marine structures will be also highlighted. A brief section on flui...
The course will give a brief overview of Ultimate load design principles and plastic capacity of sections Capacity estimate of tubular joints under axial, flexural and torsional buckling will be discussed. Fundamentals of impact analysis and its application to collision problems on marine structures will be also highlighted. A brief section on flui...
Introduction and Scope
30mFixed type structures
40mCompliant type structures
40mNew generation marine structures
32mEnvironmental loads-I
51mEnvironmental loads-II
53mEnvironmental loads-III
51mEnvironmental loads-IV
53mOther loads-I
35mOther loads-II
1h 63 minUltimate load design principles-I
54mUltimate Limit State-I
43mUltimate Limit State-II
50mUltimate Limit State-III
54mPartial safety factor
1h 60 minPlastic design-I
53mPlastic design-II
57mPlastic design-III
42mPlastic design-IV- Example problems-I
55mPlastic analysis- Example problems-II
45mPlastic analysis- Example problems-III
46mTheories of failure-I
48mTheories of failure-II
53mTheories of failure-III
47mTheories of failure-IV
52mShear centre-I
58mShear centre-II- Examples
46mPlastic capacity of sections under combined loads-I
47mPlastic capacity of sections under combined loads-II
50mImpact analysis- fundamentals-I
48mImpact analysis- fundamentals-II
48mUltimate capacity of tubular joints
59mFluid structure interaction-I
40mFluid structure interaction-II
26mFluid induced vibration-I
40mFluid induced vibration-II
56mFlow through perforated members-I
41mFlow through perforated members- numerical studies-II
56mFlow through perforated members- III- Analytical studies
49mIntroduction to Reliability I
51mIntroduction to Reliability II
56mIntroduction to Reliability III
46mReliability framework in Marine structures
37mUltimate Limit state and Reliability approach I
44mUltimate limit state and Reliability approach II
50mLevels of Reliability
58mFOSM and AFOSM methods of Reliability
53m